What spacing is required between roadway maintenance machines that are moving in the same direction. Spacing between machines to pre-vent collisions.

What spacing is required between roadway maintenance machines that are moving in the same direction. 341 Roadway maintenance machines. . Each railroad and railroad contractor may prescribe additional or more stringent operating rules, safety rules, and other special instructions that are consistent with this subpart. (5) Space between machines and roadway workers to prevent personal injury. Initial and periodic qualification of a roadway worker to operate road-way maintenance machines shall be evidenced by demonstrated An on-track roadway maintenance machine with headlights or work lights that are not in compliance may be operated for a period not exceeding seven calendar days and only during the period between one-half hour before sunrise and one-half hour after sunset; Guidance: When on-track roadway maintenance machines are operated during the period (a) Each employer shall include in its on-track safety program specific provi- sions for the safety of roadway workers who operate or work near roadway maintenance machines. Communication between machine operators and roadway workers as-signed to work near or on roadway maintenance machines. Methods to determine safe oper-ating procedures for each machine that the operator is expected to operate. (4) Spacing between machines to prevent collisions. Those provi- sions shall address: (1) Training and qualification of op- erators of roadway maintenance ma- chines. Space between machines and road-way workers to prevent personal in-jury. Before stopping or slowing down, occupants of each unit must signal those following. The standard safety guideline for this scenario is a sufficient distance to prevent an accident. (6) Maximum working and travel speeds for machines dependent upon weather, visibility, and stopping capabilities. Those provisions shall address: (1) Training and qualification of operators of roadway maintenance machines. The options provided are: the distance specified in the job briefing, a sufficient distance to prevent an accident, 200 feet, and 600 feet. (c) This subpart prescribes safety standards related to the movement of roadway maintenance machines where such movements affect the safety of roadway workers. § 214. (2) Establishment and issuance of safety procedures both for general ap- plication and for specific types (3) Communication between machine operators and roadway workers assigned to work near or on roadway maintenance machines. Maximum working and travel speeds for machines dependent upon weather, visibility, and stopping capa Two or more units of Roadway Maintenance Machines or On-Track equipment moving in the same direction must be sufficiently spaced to prevent accident. (b) Instructions for the safe operation of each roadway machine shall be provided and maintained with each machine large enough to carry the instruction An on-track roadway maintenance machine with headlights or work lights that are not in compliance may be operated for a period not exceeding seven calendar days and only during the period between one-half hour before sunrise and one-half hour after sunset; Guidance: When on-track roadway maintenance machines are operated during the period The question asks for the required spacing between roadway maintenance machines moving in the same direction. Mar 17, 2016 · 7. Spacing between machines to pre-vent collisions. (a) Each employer shall include in its on-track safety program specific provisions for the safety of roadway workers who operate or work near roadway maintenance machines. (b) New on-track roadway maintenance machines, and existing on-track roadway maintenance machines specifically designated by the employer, of the types identified in paragraphs (a) (1) through (a) (5) of this section, or functionally equivalent thereto, shall be capable of protecting employees in the cabs of the machines from exposure to air Procedures to provide for stopping the machine short of other machines or obstructions on the track. Ensure that when roadway maintenance machines are required to travel extended distances, their machine operators are able to operate this equipment while facing in the direction of the machine's movement; and 8. (3) Communication between machine operators and roadway workers assigned to work near or on roadway maintenance machines. zjk cdejsk dhp dhpwr qfmnj gni amvb oaff idjy mbf